WEATHERTEX - Natural Cladding Vgroove Weatherboards 300mm x 3.6m x 9.5mm

Weathertex Natural Cladding Vgroove Weatherboards 300mm x 3.6m x 9.5mm

The Natural range is a natural unprimed board which provides a unique appearance with the characteristics and look of raw, undressed timber. The Natural surface is pressed to create a woodgrain effect. Its rough deep cut pattern shows all the knots, cracks and imperfections of natural timber. When the Natural surface is oiled, the look of fresh brown timber is maintained. When allowed to weather naturally, the depth of colour will vary, subject to location and sun exposure. Weathertex's natural finished products are covered by a 10 year warranty not to rot, split or crack.

The 300mm board contains one 5mm wide groove and the beginning of a second groove. The groove begins with a deep 5mm groove. The Vgroove base is very narrow and rounded. This is then followed by a sharp 5mm rise, which meets with the Natural surface. When the following board is placed above the previous, the second groove is complete.

Dimensions: 3660mm x 300mm
Thickness: 9.5mm
Weight per board: 10.6 kg
Bal Rating: 19

NOTE:   Please allow up to three business days to ensure stock is on hand

Weathertex is the first manufacturing company to receive the Platinum GreenRate Level A for our Natural Range Products

Product Health Declaration

Natural Flat Sheet Weatherboards

View Weathertex’s Natural Range Product Health Declaration – a certificate that’s the first of it’s kind, aimed to help keep the industry transparent by showcasing any potential risks to health.

Weathertex is 97% hardwood timber and 3% natural wax for water repellency. White acrylic primer is then applied to the surface. The accessory products are made from a range of materials including PVC (poly vinyl chloride), aluminium and galvanised steel.

The Australian Standard AS3959-2009: Construction of Buildings in Bush fire Prone Areas, provides the framework for what is now acceptable in building throughout most of Australia. Weathertex is suitable for use in BAL-LOW, BAL-12.5 and BAL-19 construction levels. Consult your council for further information regarding what is acceptable for the region.

Weathertex currently provides a warranty which protects against a variety of conditions including (but not exclusive of) the product supplied being fit for purpose, and will not rot, split or crack. In addition to this, Weathertex is warranted against termite attack provided the following conditions are adhered to. A termite mitigation plan must be in place and maintained from the time that the Weathertex is installed and for the life of the product. Provided that the plan and its maintenance can be demonstrated then the normal Weathertex 25 year warranty at the time of purchase will apply. Please Note: Weathertex should not be used in contact with the ground. Our fixing instructions state that there should be at least 150mm clearance between the bottom edge of Weathertex and paved surfaces which are exposed to the weather and at least 225mm clearance to unprotected ground. For Further information please refer to Weathertex and Termites Fact Sheet.

For further information – please refer to the Weathertex website.